This is very straight forward you will not made mistake.
1. Plug in your router/device to the plug socket and connect your Antrouter LAN port to the network Switch Modem or Dlink Router
2. Wait till you see the LED light from WIFI - to show
3. Open your Network and connect to AntRouter via Wifi
4. Type on your Browser Eg: Chrome, Firefox, Safari etc.. : 192.168.200.1
5. If you're Successful. you'll see this below
6. Now go to System > Hostname - Change your Router name if you like, and change your Timezone, where you stay. - click save & apply
7. Go to System > Administration > Router Password > after you finished > click save & apply
Change your current 'root' password - to whatever you like.
8.Now go to Network > General Set Up > Interface Configuration > Wireless Security > Encryption > Select WPA2 - PSK > Cipher > Select Auto > Key > your new wifi password > the click save & apply
9. Now go to Miner > R1 - LTC Configuration > General Settings > Type your Pool Address > Workers > Password > 123 > click save and apply
* Note I expect you already have Pool Address, and Worker
10. Now click tab > R1 - LTC Status > if you don't see anything > dont panic > wait for sometimes > for me i waited approx. 20mins
11. Happy Mining! Enjoy
Let me know if you have something to ask or difficulties. You can comment below
By me a Coffee, if this help you: