How to make Audio Telescope for Spying? DIY

User avatar
Dohangout
Admin
Admin
Contact:
Location: Philippines
Posts: 192
Joined: Sat Apr 23, 2016 10:32 pm

How to make Audio Telescope for Spying? DIY

Sat Feb 03, 2018 11:42 am

A small signal amplifier is built around transistor BC547 (T1). Transistor T1 and the related components amplify the sound signals picked up by the condenser microphone (MIC). The amplified signal from the preamplifier stage is fed to input pin 3 of IC LM386N (IC1) through capacitor C2 (100nF) and volume control VR1 (10-kilo-ohm log). A decoupling network comprising resistor R5 and capacitor C3 provides the preamplifier block with a clean supply voltage.

Audio amplifier IC LM386N (IC1) is designed for operation with power supplies in the 4-15V DC range. It is housed in a standard 8-pin DIL package, consumes very small quiescent current and is ideal for battery-powered portable applications.

The processed output signal from capacitor C2 goes to one end of volume control VR1. The wiper is taken to pin 3 of LM386N audio output amplifier. Note that the R6-C4 network is used to RF-decouple positive-supply pin 6 and R8-C7 is an optional Zobel network that ensures high frequency stability when feeding an inductive headphone load.

Capacitor C6 (22uF, 16V) wired between pin 7 and ground gives additional ripple rejection. The output of LM386N power amplifier can safely drive a standard 32-ohm monophonic headphone/earphone.

Below is the Circuit Diagram:
SPY-EARPHONE.jpg
SPY-EARPHONE.jpg (27.03 KiB) Viewed 811 times
I hope you like it Guys! Thanks


Return to “ELECTRONICS”

Links

In total there are 8 users online :: 1 registered, 0 hidden and 7 guests
Registered users: Bing [Bot]
Most users ever online was 19 on Mon May 20, 2019 11:06 pm
Total posts 527
Total topics 406
Total members 73
Our newest member Kelly
No birthdays today